Release & Upgrade
NeeHau Client V2.0.0.23 (with OM20/20G/50/50G)
OM20G V146 Beta
OM50G V146 Beta
HX4G V367
MX8G V367
OM20 V134.P4
OM50 V134.P4
OM80E V134.P4
OM200G V134.P4
OM500 V121.P3

FAQ
General
Network and Improper Operation
Configurations
Voice Quality
Firmware Upgrade

Application Notes
How to Integrate MX Gateway with OM IP-PBX
Interconnect Two PBXs with FXO Gateways
Interconnect Two or More Extension Lines with FXS Gateways
Connecting MX100G-S SIP-ISDN Gateway to Elastix
Connecting MX100G-S SIP-ISDN Gateway to Asterisk
Expanding PBX Extensions to Remote Sites through IP Network
Multi-site Configuration for Gateways with Analog PBX
How to Troubleshoot Caller ID Detection Issues on FXO Port
Security Configuration Guide for New Rock OM Series IP-PBX
Connecting FXO Gateway to Asterisk
Connecting FXO Gateway to Elastix
Tie Trunk Configuration for OM with Elastix

Training Materials
What is VoIP gateway?
What’s the Difference between VoIP Gateway and SIP Trunk?
Smart Switchboard Introduces Exclusive Premium Customer Services
What's the Difference Between VoIP Gateway and ATA?
What's the Difference Between VoIP gateway and SBC?
New Rock’s New Gateway Security measures
Global VoIP Gateway Service Provider
How to Setup VoIP Gateway - A Complete Installation Guide
What is HX&MX VoIP Gateway Default Password?
Auto Provisioning
Six Practices for Audio Security
“PSTN failover” - Strong Support for High-availability IP Audio Communications
New Rock IP-PBX: Your All-In-One IP Office Telephony System
Connecting E1/T1-Based PBX to IP Telephony Networks
Popular IP-PBX Features Favored by Highly Efficient Officers
Five-star Customer Services
Top Three Advantages of Gateways with Imbedded VPN Clients
Low-Cost, High-Quality Gateway
Smart FoIP
Two Typical Applications for Telephone Networks
IPv6’s Top Three Advantages in VoIP Applications
MX100G-S SIP-ISDN Trunking Gateway Training
MX Series VoIP Gateway Training

Demo
OM Demo
MX Demo

Installation & Maintenance
OM20G&OM50G Quick Installation Guide
OM80E Quick Start Guide
OM200G Quick Start Guide
OM500 Quick Installation Guide
HX4G&MX8G Quick Reference Guide
MX60E Quick Installation Guide
MX120G Quick Installation Guide
MX100G-S Quick Start Guide
SX3000 Quick Installation Guide
PT2400 Quick Installation Guide
PT4800 Quick Installation Guide

Others
Manuals
Datasheet
Marketing Materials

Videos
IP-PBX Installation
Expanding PBX Extensions to Remote Sites through IP Network
Update Time:2017-06-26 13:36:27 Browse Times:2438 Amount Downloads:948
New Rock’s SIP based VoIP gateways (MX series gateways) with FXS and FXO ports support peer-to-peer mode which has many applications in deploying enterprise multi-site telephone communication.
-  Interconnect two PBXs at separate sites through IP network with FXO gateways
-  Interconnect two or more extension lines at separate sites through IP network with FXS gateways
-  Expanding PBX extensions to remote sites through IP network
In this application note, the third one popular application and related configurations are described.

Scenario

In this scenario, a PBX located at different site need to be interconnected through IP network to expand PBX extension lines.

In this diagram, the FXO gateway is installed with the FXO ports connecting to the extension ports of the PBX while FXS gateway is installed with the FXS ports connecting to analog phones. WAN ports are connected to the router in the local office. Both gateways are interconnected over the IP network with SIP protocol in peer-to-peer mode for call setup.
Note: A static public IP address is required if the IP network is Internet.

Configuration on FXO Gateway

1.On the Basic > SIP page, fill in FXS gateway’s IP address in the Proxy Server field, as follows:

2.On the Basic > System page, select RFC2833 in the DTMF method filed , as follows:

3.On the Line > Trunk, select Binding in the Inbound handle field, and fill in the corresponding phone number of the FXS port in the Binding number field, as follows:

Configuration on FXS Gateway

1.On the Basic > SIP page, fill in FXO gateway’s IP address in the Proxy Server field, as follows:

2.On Basic > System, same as we did on FXO gateway.

3.On the Line > Feature, select Hot Line in the Hot line field, and fill in the corresponding FXO port number in the Hot line number field, as follows:

With FXO-FXS hot line arrangement as described in the above configurations, there is no need to use routing table.

Dialing Method

For making outbound call, the user picks up the phone and the SIP connection will be established immediately between the FXO-FXS port pair, and the dial tone from the PBX to the user will be heard after the FXO port goes off-hook.
About New Rock
Corporate Information
Honor
Contact Us
Partner
Partner Benefits
Join the Program
News
Latest News
Industry Insights
Announcements
Support
Release & Upgrade
FAQ
Application Notes
Training Materials
Demo
Installation & Maintenance
Others
Videos
Contact Us

 +86 21-61202700

 global@newrocktech.com
     3F of Building 4, No. 188

     Pingfu Road, Xuhui District,

     Shanghai 200231, China